Research

Examination of steel compatibility with additive manufacturing and repair via laser directed energy deposition

Barr, C., Rahman Rashid, R., Palanisamy, S., Watts, J., Brandt, M., (2023) Journal of Laser Applications, 35, 022015

Fluorescent probe for the identification of potent inhibitors of the macrophage infectivity potentiator (Mip) protein of Burkholderia pseudomallei

Scheuplein, N.J., Lohr, T., Vega, M.V., Ankrett, D., Seufert, F., Kirchner, L., Harmer, N.J., Holzgrabe, U., (2023) SLAS Discovery

Reinforcement-learning-based robust resource management for multi-radio systems

Delaney, J., Dowey, S., Cheng, C., Sensors, vol 23,

Analysis of Structure-activity relationships of novel inhibitors of the Macrophage Infectivity Potentiator (Mip) proteins of Neisseria meningitidis, Neisseria gonorrhoeae, and Burkholderia pseudomallei

Scheuplein, N.J., Bzdyl, N.M., Lohr, T., Kibble, E.A., Hasenkopf, A., Herbst, C., Sarkar-Tyson, M., Holzgrabe, U., (2023) Journal of Medicinal Chemistry

Rapid, sensitive, and specific, low-resource molecular detection of Hendra virus
Pollak, N.M., Marsh, G.A., Olsson, M., McMillan, D., and Macdonald, J. (2023), One Health, Vol 16,

Evaluation of three rapid low-resource molecular tests for Nipah virus
Pollak, N., Olsson, M., Marsh, G., Macdonald, J., & McMillan, D. (2023), Frontiers in Microbiology, 13, 1–12.

The Friedlander–Heaviside Series for Describing Pressure-Time History of Reflected Blast Waves
Bortolan Neto, L (2023), SSRN

Strengthening mechanisms in Monel K500 alloyed with A1 and Ti
Kostryzhev, A.G., Marenych, O.O., Pan, Z., Li, H., and van Duin, S. (2023), Journal of Materials Science, 58, 4150–4164

Rapid Diagnostic Tests for the Detection of Four Dengue Virus Serotypes

Pollak, N.M., Olsson, M., Ahmed, M., Tan, J., Lim, G., Setoh, Y., Wong, J.C.C, Lai, Y.L., Hobson-Peters, J., Macdonald, J., McMillan, D. (2023) Microbiology Spectrum

Design optimization and finite element model validation of LPBF-printed lattice-structured beams

Rashid, R., Masood, S., Ruan, D., Palanisamy, S., Huang, X., and Rahman Rashid, R.A. (2023) Metals

Effect of in situ tempering on the mechanical microstructural and corrosion properties of 316L stainless steel laser-cladded coating on mild steel

Rahman Rashid, R.A., Javed, M.A., Barr, C., Palanisamy, S., Matthews, N., and Dargusch, M.S, (2021) The International Journal of Advanced Manufacturing Technology

Targeting Protein Folding: A Novel Approach for the Treatment of Pathogenic Bacteria

Scheuplein, N.J., Bzdyl, N.M., Kibble, E.A., Lohr, T., Holzgrabe, U., and Sarkar-Tyson, M, (2020), Journal of Medicinal Chemistry, Vol 63

Effect of corrosion-inhibiting compounds on the corrosion behaviour of pure magnesium and magnesium alloys

Sultan, A, Dargusch, M.S., Shi, Z. Jones, F., Wood, B., Gerrard, D. , Atrens, A. (2020) Journal of Magnesium and Alloys, online 6 Oct 2020

Mechanical properties of SLM-Printed Aluminium Alloys: A Review

Ponnusamy, P., Rahman Rashid, R.A., Masood, S.H., Ruan, D and Palanisamy, S (2020), Materials, 13, 4301

Influence of fill thickness on tensile performance of 300M high strength steel following laser metal deposition repair

Barr, C., Da Sun, S., Orchowski, N., Matthews, N., and Brandt, M, (2020), Journal of Laser Applications, 32, 022061

Thermal coupling of an open-cathode proton exchange membrane fuel cell with metal hydride canisters: An experimental study

Omrani, R., Nguyen, H.Q and Shabani, B, International Journal of Hydrogen Energy, vol 45, Issue 38, 18753-20162

Influence of delay strategies and residual heat on in-situ tempering in the laser metal deposition of 300M high strength steel 

Barr, C., Da Sun, S., Easton M., Orchowski, N., Matthews, N., and Brandt, M., (2020)  Surface and Coatings Technology, Vol 383

Evolving strategies for producing multiscale graphene-enhanced composites for smart, structural applications

Mirabedini, A., Ang, A., Nikzad, and Hameed, N., (2020)  Advance Science, online

The Detroit 562 Pharyngeal Immortalized Cell Line Model for the Assessment of Infectivity of Pathogenic Neisseria sp.

Kibble E.A., Sarkar-Tyson M., Coombs G.W., Kahler C.M. (2019) in: Seib K., Peak I. (eds) Neisseria meningitidis. Methods in Molecular Biology, vol 1969

Industry 4.0: Development of a multi-agent system for dynamic value stream mapping in SMEs

Huang, Z., Kim, J., Sadri, A., Dowey, S., and Dargusch, M.S,. (2019) Journal of Manufacturing Systems, 52, Part 1, pp 1-12.

A combination of keyhole GTAW with a trapezoidal interlayer: A new insight into armour steel welding

Fei, Z., Pan, Z., Cuiuri, D., Li, H., Gazder, A.A., (2019) Materials, 12, 3571.

Plasticity and ductile fracture behaviour of four armour steels

McDonald, B., Bornstein, H., Ameri, A., Daliri, A., and Orifici, A.C., (2019) International Journal of Solids and Structures, 176-177, 135-149

Comparative effect of mn/Ti solute atoms and TiC/Ni3(Al,Ti) nano-articles on work hardening behaviour in Ni-Cu alloys fabricated by wire arc additive manufacturing

Marenych, O.O., Kostryzhev, A., Shen, C., Pan, Z., Li, H., and van Duin, S. (2019)  Materials Science & Engineering A, 2019, vol 753, 262-275

Understanding the corrosion behaviour of the magnesium alloys EV31A, WE43B, and ZE41A

Soltan, A., Dargusch, M.S., Shi, Z., Gerrard, D., and Atrens, A., (2019) Materials and Corrosion, 70, 1527-1552

Exploring ferroelectric domain engineering through ceramics texturing, for underwater acoustics applications

Moriana, A.D., Cheng, Z.X., and Zhang, S (2019) Paper presented at Pacific International Maritime Conference (IMC2019), 8 – 10 October 2019, Sydney Australia.

Laser ultrasonic inspection of additive manufactured components

Davis, G., Nagarajah, R., Palanisamy, S., Rahman Rashid, R.A., Rajagopal, P., and Balasubramaniam, K (2019) International Journal of Advanced Manufacturing Technology, pp 1-9

Dynamic shear testing of 2024-T351 Aluminium at elevated temperature

Edwards, N.J., Kariem, M.A., Rahman Rashid, R.A., Cimpoeru, S.J., Lu, G., and Ruan, D., (2019) Materials Science & Engineering A, 754, 99-111

Improving the weld microstructure and material properties of K-TIG welded armour steel joint using filler material

Fei, Z., Pan, Z., Cuiuri, D., Li, H., Wu, B., and Su, L., (2019) International Journal of Advanced Manufacturing Technology, vol 100, 1931-1944

Verification of a GPS Reflectometry Sensor using a Software Defined Radio

Southwell, B.J., Glennon, E.P., Cheong, J.W., Dempster, A.G. (2019) Paper presented at Australian Space Research Conference, 30 September – 2 October 2019, Adelaide, SA.

Ultrasonic processing for structure refinement: An overview of mechanisms and application of the Interdependence Theory

Balasubramani, N., StJohn, D., Dargusch, M.S., and Wang, G (2019) Materials, vol 12, pp 1 – 33.

Parameter study and optimization of a half-vehicle suspension system model integrated with an arm-teeth regenerative shock absorber using Taguchi method

Zhang, R., and Wang, X (2019) Mechanical Systems and Signal Processing, 126, 65-81

Body armour – New materials, new systems

Crouch, I.G (2019) Defence Technology

Cellular Automation Finite Element Modeling of the Evolution of the As-Cast Microstructure of an Ultrsonically Treated Al-2Cu Alloy

Wang, G., Croaker, P., Dargusch, M., McGuckin, D., and StJohn, D (2019) in: Chesonis C. (eds) Light Metals 2019, pp 1617-1622

Precipitation Strengthening in Ni-Cu Alloys Fabricated using Wire Arc Additive Manufacturing Technology

Marenych, O.O., Kostryzhev, A., Shen, C., Pan, Z., Li, H., and van Duin, S. (2019) Metals 2019, 9(1), 105

Evaluation of novel inhibitors against the macrophage infectivity potentiator in biowarfare agents

Iwasaki, J., Kibble, E., Norville, I., Atkins, T., Myler, P.J., Lorimer, D., Harmer, N., Hasenkopf, A., Seufert, F., Holzgrabe, U., and Sarkar-Tyson, M. (2019). Paper presented at CBRNE, 20 – 23 May 2019, Nantes, France

Degradation and stabilization of polyurethane elastomers

Xie, F., Zhang, T., Bryant, P., Kurusingal, V., Colwell, J.M., and Laycock, B. (2019) Progress in Polymer Science , 90, 211-268

Diffraction line profile analysis of 3D wedge samples of Ti-6Al-4V fabricated using four different additive manufacturing processes

Cottam, R., Palanisamy, S., Avdeev, M., Jarvis, T., Henry, C., Cuiuri, D., Balogh, L., and Rahman Rashid, A.R. (2018) Metals 2019, 9, 60

Unsaturated Soil Blast: Flying Plate Experiment and Numerical Investigations

Linforth, S., Tran, P., Rupasinghe, M., Nguyen, N., Ngo, T., Saleh, M., Odish, R, and Shanmugam, D., (2018) International Journal of Impact Engineering Vol 125, pp212-228

Insights into Machinng of a [Beta] Titanium Biomedical Alloy from Chip Microstructures

Kent, D., Rashid, R. R., Bermingham, M., Attar, H., Sun, S., and Dargusch, M (2018) Metals, vol 8, pp 710

Adiabatic Shear Bands in 2024-T351 Aluminium

Edwards, N.J., Cimpoeru, S.J., Ruan, D., and Lu, G., (2018) Paper presented at 13th International Nordmetall Colloquium, 4-5 December 2018, Adorf, Germany

Novel HVOF coatings for extreme environment

Howse, H., and Ang, A., (2018) Paper presented at International Thermal Spray Conference (ITSC) 2018, Orlando, Florida USA

Machining of GTAW additively manufactured Ti-6Al-4V structures

Hoye, N., Cuiuri, D., Rahman Rashid, R.A., and Palanisamy, S., (2018) The International Journal of Advanced Manufacturing Technology, vol 99, Issue 1-4, pp 313-326

Developing National Earth Observation Capabilities for Australia with Small Satellites

Clayfield, K.C., (2018) Paper presented at 69th International Astronautical Congress, 3 October 2018, Bremen, Germany

Macrophage Infectivity Potentiator Proteins as Novel Anti-Virulence Targets in Neisseria meningitidis

Kibble, E., Iwasaki, J., Coombs, G., Kahler, C., and Sarkar-Tyson, M (2018). Paper presented at 28th Combined Biological Science Meeting (CBSM), 31 August 2018, Western Australia, Australia

Lead-free textured piezo-ceramics using tape casting: A review

Moriana, A.D., and Zhang, S (2018) Journal of Materiomics 4 (4) pp 277-303

Body armor for stab and spike protection Part 2: a review of test methods

Nayak, R., Crouch, I., Kanesalingham, S., Wang, L., Ding, J., Tan, P., Lee, B., Miao, M., Ganga, D., and Padhye, R., (2018) Textile Research Journal 0 (00) 1 – 20

A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder

Nazari, K., Rahman Rashid, R.A., Palanisamy, S., Xia, K., and Dargusch, M.S., (2018) Materials Letters vol 229, pp 301-304

Metallurgical features of direct laser-deposited Ti6AI4V with trace boron

Rashid, R., Palanisamy, S., Attar H., Bermingham, M., and Dargusch, M.S., (2018) Journal of Manufacturing Processes, vol 35, p 651-656

Evaluation of novel inhibitors against the macrophage infectivity potentiator in Gram-negative bacteria

Sarkar-Tyson, M. et al (2018) Paper presented at Australian Society for Microbiology (ASM), 1 July 2018, Brisbane QLD, Australia

Rapid mechanical evaluation of quadrangular steel plates subjected to localised blast loadings

Bortolan Neto, L., Saleh, M., Pickerd, V., Yiannaopoulos, G.,  Mathys, Z., and Reid, W. (2018) Paper presented at 25th Military Aspects of Blast and Shock Conference (MABS25) 23-28 September 2018, The Hague, The Netherlands

Optimisation of numerical modelling for structures subjected to internal blast

Saleh, M., Pickerd, V., Yiannaopoulos, G., Brincat, M., Vincent, P., Bortolan Neto, L., Mathys, Z., and Reid, W. (2018) Paper presented at 25th Military Aspects of Blast and Shock Conference (MABS25) 23-28 September 2018, The Hague, The Netherlands

Evaluation of Constitutive models for predicting the deformation and rupture behaviour of armour steel under localised blast loading

McDonald, B., Bornstein, H., Langdon, G., Ameri, A., and Orifici, A. (2018) Paper presented at 25th Military Aspects of Blast and Shock Conference (MABS25) 23-28 September 2018, The Hague, The Netherlands

In-situ control of tempered martensie during laser cladding repair of aero-grade 300M steel using AISI 420 stainless steel powder

Sun, S., Barr, C., and Brandt, M. (2018) Journal of Laser Applications, Vol 30

A novel indirect-drive regenerative shock absorber for energy harvesting and comparison with a conventional direct-drive regenerative shock absorber

Zhang, R., Wang, E., Al Shami, S., John, L., Zuo, C., and Wang, H. (2018) ” Applied Energy vol 229 pp 111-127

Influence of macrosegregation on solidification cracking in laser clad ulta-high strength steels

Barr, C., Sun, S.D., Easton, M., Orchowski. N., Matthews, N., and Brandt, M. (2018) Surface and Coatings Technology vol 340 pp 126-136.

A comparison of the antifouling performance of air plasma spray (APS) ceramic and high velocity oxygen fuel (HVOF) coatings for use in marine hydraulic applications

Piola, R., Ang, A.S.M., Leigh, M., Wade, S.A. (2018) Biofouling vol 2018 pp 1-13

Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy

Rashid, R., Masood, S.H., Ruan, D., Palanisamy, S., Rahman Rashid, R.A., Elambasseril, J and Brandt, M. (2018)  Additive Manufacturing vol 22 pp 426-439

Evolution of the As-Cast Grain Microstructure of an Ultrsonically Treated Al-2Cu Alloy

Wang, G., Croaker, P., Dargusch, M., McGuckin, D., and StJohn, D (2018) Advanced Engineering Materials pp 1 -11

High performance thermoelectric materials: Progress and their applications

Yang, L., Che, Z.G., Dargusch, M.S., and Zou, J. (2018) Advanced Energy Materials vol 8, issue 6

Mechanical and microstructural properties of 2024-T351 aluminium using a hat-shaped specimen at high strain rates

Edwards, N.J., Song, W., Cimpoeru, S.J., Ruan, D., Lu, G., and Herzig, N. (2018) Materials Science & Engineering A, Vol 720 pp 203-213

Investigation into the viability of K-TIG for joining armour grade quenched and tempered steel

Fei, Z., Pan, Z., Cuiuri, D., Li, H., Wu, B., Ding, D., Su, L. & Gazder, A. A. (2018) Journal of Manufacturing Processes, vol 32, pp 482-493

Microbiologically Influenced Corrosion of UNS N05500 in seawater immersion trial

Wade, S., Ang, A., Piola, R., and Neil, W. (2018) Materials Performance, vol 57 pp 66 – 69

Experimental response of high strength steels to localized blast loading

McDonald, B., Bornstein, H., Langdon, G.S., Curry, R., Daliri, A., and Orifici, A.C. (2018) International Journal of Impact Engineering, Vol 115, pp. 106-119

A novel regenerative shock absorber with a speed doubling mechanism and its Monte Carlo simulation

Zhang, R., Wang, X., and Liu, Z. (2017) Journal of Sound and Vibration 417 (2018) pp 260-276

Metal Alloys for Fusion-Based Additive Manufacturing

Zhang, D., Sun, S., Qiu, D., Gibson, M.A., Dargusch, M.S., Brandt, M., Qian, M., and Easton, M., (2018) Advanced Engineering Materials

High strain rate dynamic behaviour of AISi12 alloy processed by selective laser melting

Ponnusamy, P., Masood, S.H., Palanisamy, S., and Rahman Rashid, R.A. (2018) International Journal of Advanced Manufacturing Technology, pp 1 – 13

Freeze casting for near-net-shaping of dense zirconium diboride ceramics

Leo, S., Jukes, L., Pinches, S., Tallon, C., and Franks, G.V. (2018) Journal of the American Ceramic Society

Experimental evaluation of the effect of workpiece heat treatments and cutting parameters on the machinability of Ti-10V-2Fe-3Al [Beta] titanium alloy using Taguchi’s design of experiments

Khanna, N., Rashid R. A. and Palanisamy, S. (2017) International Journal of Machining and Machinability of Materials (IJMMM), Vol. 19, No. 4

Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate

Rashid, R. A. R., Abaspour, S., Palanisamy, S., Matthews, N., & Dargusch, M. S.(2017) Surface and Coatings Technology, 327, 174-184

High strain rate deformation of ARMOX 500T and effects on texture development using neutron diffraction techniques and SHPB testing

Saleh, M., Kariem, M. M, Luzin, V, Toppler, K, Li, H and Ruan, D (2017) Materials Science & Engineering A 709 (2018) pp 30-39

Effect of tool wear on chip formation during dry machining of ti-6Al-4V alloy, Part 1: Effect of gradual tool wear evolution

Sun, S., Brandt, M., & Dargusch, M. S (2017) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(9), 1559-1574

Effect of tool wear on chip formation during dry machining of ti-6Al-4V alloy, Part 2: Effect of tool failure modes

Sun, S., Brandt, M., and Dargusch, M. S (2017) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(9), 1575-1586

Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

Wang, G., Wang, Q., Easton, M. A., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H (2017) Scientific Reports, 7(1)

Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)

Rashid, R., Masooda, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R.A. and Brandt, M. (2017) Journal of Materials Processing Technology

Repair and manufacturing of military aircraft components by additive manufacturing technology

Liu, Q; Djugum, R; Sun, S; Walker, K; Choi, J and Brandt, M.(2017) in 17th Australian International Aerospace Congress : AIAC 2017. pp 363-368

Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy

Wang, G., Dargusch, M. S., Eskin, D. G., & Stjohn, D. H. (2017) Advanced Engineering Materials, published online 29 May 2017

Studies on the effect of Arc current mode and substrate rotation configuration on the structure and corrosion behaviour of PVD TiN coatings

Ward, L., Pilkington, A. & Dowey, S. (2017) Coatings 2017, 7(4)

Particle swarm optimization approach to defect detection in armour ceramics

Kesharaju, M., & Nagarajah, R. (2017) Ultrasonics, 75, pp 124-131.

Body armor for stab and spike protection, part 1: Scientific literature review

Nayak, R., Crouch, I., Kanesalingam, S., Ding, J., Tan, P., Lee, B., Miao, M., Ganga, D. and Wang, L. Textile Research Journal

Optimising the welding conditions to determine the influence of shielding gas on fume formation rate and particle size distribution for gas metal arc welding

Carpenter, K. R., Monaghan, B. J., Cuiuri, D., and Norrish, J. Welding in the World , 61(3), pp 473-481

Modelling the elastic properties of bi-continuous composite microstructures captured with TriBeam serial-sectioning

Mignone, P. J., Echlin, M. P., Pollock, T. M., Finlayson, T. R., Riley, D. P., Sesso, M. L., and Franks, G. V.  Computational Materials Science, 131, pp 187-195

Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy

Wang, G., Croaker, P., Dargusch, M., McGuckin, D. and StJohn, D A. Computational Materials Science , 134, pp 116–125

On the need for more realistic experimental conditions in laboratory-based microbiologically influenced corrosion testing

Wade, S.A., Javed, M. A., Palombo, E. A., McArthur, S. L. and Stoddart P. R. International Biodeterioration & Biodegradation , 121, pp 97-106

Profluorescent nitroxide sensors for monitoring photo-induced degradation in polymer films

Lussini, V. C., Colwell, J. M., Fairfull-Smith, K. E., and Bottle, S. E. Sensors and Actuators, B: Chemical, 241, pp 199-209

Colloidal processing: Enabling complex shaped ceramics with unique multiscale structures

Franks, G. V., Tallon, C., Studart, A. R., Sesso, M. L., & Leo, S.  Journal of the American Ceramic Society, 100(2), pp 458-490

Exploring inexpensive processing routes to prepare dense TiB2 components

Tallon, C. and Franks, G. V. Advances in Applied Ceramics , 115(7), pp 403-410

Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips

Lui, E. W., Palanisamy, S., Dargusch, M. S., & Xia, K.  Journal of Materials Processing Technology, 238, pp 297-304

Armour Steels

Crouch, I. G., Cimpoeru, S. . Li, H., and Shanugam, D.

Chapter 2 in The Science of Armour Materials, Woodhead Publishing pp 55-115

Light Alloys

Edwards, D.P. and Crouch, I. G.

Chapter 3 in The Science of Armour Materials, Woodhead Publishing pp 117-165

Laminated materials and layered structures

Crouch, I. G.

Chapter 4 in The Science of Armour Materials, Woodhead Publishing pp 167-201

Polymers and fibre-reinforced plastics

Crouch, I. G., Sandlin, J. and Thomas, S.

Chapter 5 in The Science of Armour Materials, Woodhead Publishing pp 203-268

Fibres, textiles and protective apparel

Crouch, I. G., Arnold, L., Pierlot, A., Billon, H.

Chapter 6 in The Science of Armour Materials, Woodhead Publishing pp 269-330

Glasses and Ceramics

Crouch, I. G., Franks, G.V., Tallon, C., Thomas, S., Naebe, M.

Chapter 7 in The Science of Armour Materials, Woodhead Publishing pp 331-393

Analytical techniques and mathematical modelling

Ryan, S.

Chapter 8 in The Science of Armour Materials, Woodhead Publishing pp 395-481

Numerical modelling and computer simulations

Saleh, M., Edwards, L. and Crouch, I. G.

Chapter 9 in The Science of Armour Materials, Woodhead Publishing pp 483-579

High strain rate and specialised testing

Ruan, D., Kariem, M.A., and Crouch, I. G.

Chapter 10 in The Science of Armour Materials, Woodhead Publishing pp 581-637

Ballistic testing methodologies

Crouch, I. G. and Eu, B.

Chapter 11 in The Science of Armour Materials, Woodhead Publishing pp 639-673

The future of armour materials

Crouch, I. G.

Chapter 12 in The Science of Armour Materials, Woodhead Publishing pp 675-692

Dynamic jacket removal and the bullets journey

Roberts, A., Appleby-Thomas, G. J., Wood, D. C., Hameed, A., & Crouch, I. G.   Paper presented at the Proceedings – 29th International Symposium on Ballistics, Edinburgh, Scotland, UK May 9–13, 2016 pp 2307

Material science behind the development of a new, shapeable, boron carbide, armour material

Crouch, I.C., Sandlin, J., Thomas, S., and Seeber, A.  29th International Symposium on Ballistics, Edinburgh, Scotland, UK May 9–13, 2016 pp 2332-2342

Analysis of the residual stress in ARMOX 500T armour steel and numerical study of the resultant ballistic performance

Saleh, M., Luzin, V., Kariem, M. M. and Ruan, D (2016). Materials Research Proceedings 2 (2016) pp 437-442

A novel top surface analysis method for mode I interface characterisation using digital image correlation

Reiner, J., Torres, J. P., & Veidt, M. (2016) Engineering Fracture Mechanics

Ballistic evaluation of an Australian ultra-high hardness steel

Ryan, S., Li, H., Edgerton, M., Gallardy, D., and Cimpoeru, S.  Paper presented at the Proceedings – 29th International Symposium on Ballistics, Edinburgh, Scotland, UK May 9–13, pp 1773-1778

Characterisation of armour properties for the prediction of rupture in localised blast loading

McDonald, B., Bornstein, H., & Orifici, A. C. Paper presented at the Proceedings – 29th International Symposium on Ballistics, Edinburgh, Scotland, UK May 9–13, 2016, vol 1, pp. 1135-1146

Pressureless sintering of ZrB2 prepared by colloidal processing: Particle packing, sintering conditions, and additives

Leo, S., Tallon, C., and Franks, G. V.  Journal of the American Ceramic Society, 99 (2), pp 3883-3892

Automatic program generation for welding robots from CAD

Larkin, N., Short, A., Pan, Z., & Van Duin, S.  Paper presented at the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2016-September 560-565

The effect of droplet size on the localized corrosion of high-strength aluminium alloys

Knight, S. P., Sudholz, A. D., Butler, A., Palanisamy, S., Dargusch, M. S., & Trueman, A. R.  Materials and Corrosion, 67 (12), pp 1294-1307

Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings

Han, B., Veidt, M., Reiner, J. and Dargusch, M.  Journal of Mechanical Engineering Research,  8(1), pp. 1-17

Fabricating superior NiAl bronze components through wire arc additive manufacturing

Ding, Donghong, Pan, Z., van Duin, S., Li, H., and Shen, C.  Materials 2016, 9(8), no 652

Hybrid polymer composites for high strain rate applications

Daliri, A., Zhang, J. and C.H. Wang  Chapter 6 Lightweight Composite Structures in Transport – Design, Manufacturing, Analysis and Performance, pp 121–163

‘Effect of ultrasonic treatment on the As-Cast grain structure during the solidification of an Al-2Cu alloy’

Wang, G., Dargusch, M.S. and St John, D.H. Proceedings of The Ninth Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Ed. by T. Furuhara, M. Nishida and S. Miura, The Japan Institute of Metals and Materials pp 344 – 347.

Influence of carbon steel grade on the initial attachment of bacteria and microbiologically influenced corrosion

Javed, M. A., Neil, W. C., Stoddart, P. R., & Wade, S. A.  Biofouling,  32(1), pp 109-122

Mechanical strength and damage tolerance of highly porous alumina ceramics produced from sintered particle stabilized foams

Tallon, C., Chuanuwatanakul, C., Dunstan, D. E., & Franks, G. V.  Ceramics International, 42, (7), pp 8478–8487

Evaluation of magnesium die-casting alloys for elevated temperature applications: castability

Easton, M. A., Zhu, S., Abbott, T.B., Dargusch, M., Murray, M., Savage, G., Hort, N. & Gibson, M.A.  Advanced Engineering Materials, 18, (6) pp 953–962

Development of processing windows for HVOF carbide-based coatings

Ang, A. S. M., Howse, H., Wade, S. A., & Berndt, C. C. Journal of Thermal Spray Technology, 25(1-2), pp 28-35

Manufacturing of nickel based cermet coatings by HVOF process

Ang, A., Howse, H., Wade, S., & Berndt, C.  Surface Engineering

Defect characterisation in laminar composite structures using ultrasonic techniques and artificial neural networks

Barry, T. J., M. Kesharaju, C.R. Nagarajah & S Palanisamy  Journal of Composite Materials, 50(7), pp 861-871

Thermoforming and structural analysis of combat helmets

Cartwright, B. K., Lex Mulcahy, N., Chhor, A. O., Thomas, S. G. F., Suryanarayana, M., Sandlin, J. D., Couch, I.G. & Naebe, M.  Journal of Manufacturing Science and Engineering, 137(5), Article number 051011

Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S

Gao, Y., Wang, G., Bermingham, M. J. & Dargusch, M. S.  International Journal of Advanced Manufacturing Technology, 79(9-12), 1949-1960

Evaluation of magnesium die-casting alloys for elevated temperature applications: microstructure, tensile properties, and creep resistance

Zhu, S., Easton, M.A., Abbott, T.B., Nie, J.F, Dargusch, M.S., Hort, N. & Gibson, M. A.  Metallurgical and Materials Transactions A, 46A, pp 3543 – 3554

The ballistic performance of an ultra-high hardness armour steel: An experimental investigation

Ryan, S., Li, H., Edgerton, M., Gallardy, D. & Cimpoeru, S. J. International Journal of Impact Engineering, 94, pp 60-73

Dynamic modulus and strain wave velocity in ballistic fibre strands

Miao, M. Journal of Materials Science, 51(12), pp 5939-5947

A methodology for hydrocode analysis of ultra-high molecular weight polyethylene composite under ballistic impact

Nguyen, L. H., Lässig, T. R., Ryan, S., Riedel, W., Mouritz, A. P., & Orifici, A. C.  Composites Part A: Applied Science and Manufacturing, 84, pp 224-235

The efficiency of ultra-high molecular weight polyethylene composite against fragment impact

Nguyen, L. H., Ryan, S., Cimpoeru, S. J., Mouritz, A. P. & Orifici, A. C.  Experimental Mechanics, 56, (4), pp 595-605

Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy

Rashid Rahman, R. A., Palanisamy, S., Sun, S., & Dargusch, M. S. International Journal of Advanced Manufacturing Technology, 83, Issue 9-12, pp 1457-1465

Evaluation of microstructure and fatigue properties in laser cladding repair of ultrahigh strength AerMet® 100 steel

Sun, S. D., Leary, M., Liu, Q. & Brandt, M. Journal of Laser Applications, 27(S2)

Feature selection for neural network based defect classification of ceramic components using high frequency ultrasound

Kesharaju, M. and Nagarajah, R.  Ultrasonics, 62, pp 271-277

Polyaromatic profluorescent nitroxide probes with enhanced photostability

Lussini, V.C., Blinco, J.P., Fairfull-Smith, K.E & Bottle, S.E.   Chemistry, A European Journal, 21, (50) pp 18258–18268